Crystallite Depth 8 RF Micro Needling Machine
Versatile Full-Body Application: Equipped with various probe tips (12P/24P/40P) and dual handpieces, the system addresses diverse needs, including facial wrinkle reduction and tightening, acne, scarring, stretch marks, and axillary osmidrosis (underarm odor).
Safe, Precise, and Enhanced Absorption: Featuring 0.22mm tapered needles for a virtually painless and bloodless experience; a "burst mode" ensures uniform energy delivery while opening skin channels to boost the absorption of repair products, yielding synergistic results.
Description
Technical Parameters
Product Overview
The Crystallite Depth 8, offered by Benomi, is a fractional radiofrequency microneedling system that fuses mechanical skin penetration with targeted RF heating. Instead of simply creating micro-channels, each ultra-thin insulated needle emits energy only at its tip, allowing the thermal effect to begin at a pre-selected depth rather than along the entire puncture track. This approach spares the upper skin layers while directing heat into the dermis and subdermal tissue.
The handpiece drives a disposable array of 12, 24, or 40 needles into the skin under precise electronic control. Needle depth is adjustable from 0.5 mm to 7 mm, with the emitted energy continuing to spread roughly 1 mm beyond the tip, resulting in a maximum thermal penetration near 8 mm. The burst mode retracts the needles stepwise, firing RF at multiple depths in one insertion. This creates stacked columns of heat that stimulate fibroblasts and denature existing collagen, leading to both immediate tightening and progressive remodeling.
A second handpiece and a nano crystal head broaden the system's utility. The nano crystal option works superficially for texture improvement and serum infusion. Disposable probes are strictly single-use, eliminating any risk of cross-contamination. The console is designed for daily clinical throughput, with an intuitive touchscreen and stable energy delivery across long sessions.

Key Advantages
Multi-Depth Heating From a Single Insertion
Burst mode triggers RF emission at three successive depths as the needles withdraw. This layered energy pattern remodels tissue at the dermal, mid-dermal, and subdermal levels simultaneously, producing a more uniform result than single-depth systems.
Insulated Needles With Minimal Surface Trauma
Each needle is tapered from 0.22 mm at the base to 0.1 mm at the tip, and the shaft is fully insulated except at the apex. RF only exits at the deepest point, so the entry wound stays tiny. Patients experience less pain and bleeding, and post-inflammatory hyperpigmentation risk drops sharply.
Disposable Probes in Three Configurations
The 12-pin, 24-pin, and 40-pin arrays cover everything from small facial zones to broad body surfaces. The 40-pin head is well suited for stretch marks and cellulite on the abdomen or thighs, while the 12-pin handles delicate areas such as the under-eye and upper lip. All probes are single-use.
Dual Handpiece Workflow
The console supports two handpieces at once, letting a clinic switch between the fractional head and the nano crystal head without rebooting or replugging. One patient can receive a full-face fractional treatment and then an immediate serum infusion in the same appointment.
Thermal Fat Remodeling and Skin Tightening
RF energy reaches the subdermal fat layer at deeper needle settings. Fat cells are liquefied and gradually cleared through natural metabolism, while heat-induced collagen contraction tightens the overlying skin. This dual action improves mild laxity, cellulite, and uneven contours without surgery.
Improved Product Absorption
The micro-channels remain open for a short window after treatment. Applying a repair serum, antioxidant, or prescription agent during this period allows active ingredients to bypass the stratum corneum. The combination of RF remodeling and deep infusion consistently outperforms topical application alone.
Wide Clinical Scope
The system is effective for acne scars, surgical scars, stretch marks, fine lines, enlarged pores, hyperpigmentation, active acne, and underarm hyperhidrosis. Because depth and energy are independently controlled, the same console adapts to both thin facial skin and thicker body regions.
Technical Specifications
| Parameter | Detail |
|---|---|
| Technology | Fractional RF microneedling |
| Needle Depth Range | 0.5 mm – 7 mm |
| Maximum Thermal Penetration | Approximately 8 mm below skin surface |
| Needle Diameter | 0.22 mm base, 0.1 mm tip |
| Needle Coating | Gold-plated, insulated shaft |
| Probe Types | 12-pin, 24-pin, 40-pin, nano crystal head |
| Probe Life Cycle | Single-use, disposable |
| Handpiece Support | Two handpieces simultaneously |
| Emission Modes | Continuous, burst (multi-depth retraction) |
| Display | Touchscreen |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Certifications | ISO 13485, CE, FDA |
| Warranty | 2 years |



Ideal Settings
Dermatology practices focused on scar revision, active acne, and pore refinement.
Aesthetic clinics offering full-field skin rejuvenation and anti-aging packages.
Body contouring centers treating stretch marks, cellulite, and mild skin laxity.
Postpartum recovery studios addressing abdominal striae and tissue relaxation.
Medical spas combining RF microneedling with professional serums or growth factors.
Plastic surgery clinics using the system for pre- and post-operative skin conditioning.
Treatment Comparison
Case A: Atrophic Acne Scars
A 27-year-old woman with boxcar scars on both cheeks completed five sessions using the 24-pin array at 2.0 mm depth. Photographs taken before and after the course showed a visible reduction in scar border definition and smoother surface texture. The patient noted that foundation no longer settled into depressions.
Case B: Abdominal Stretch Marks
A 31-year-old mother presented with red and white striae across the lower abdomen. Six sessions at three-week intervals using the 40-pin probe at depths between 2.5 mm and 3.5 mm produced noticeable fading of the red marks and a softer appearance of the white striae. The surrounding skin felt firmer on palpation.
Case C: Underarm Odor and Sweating
A 30-year-old male received two treatments with the 12-pin probe at 3.0 mm depth. RF heating targeted sweat and sebaceous glands, reducing both moisture and odor. The patient reported a significant drop in odor within two weeks, and the improvement held for over six months without additional sessions.
Case D: Facial Fine Lines and Laxity
A 50-year-old woman with perioral wrinkles and early jowling underwent three sessions spaced four weeks apart using the 24-pin probe at 2.5 mm. Immediately after each session, the skin felt tighter, and by the three-month mark, the nasolabial folds appeared shallower. Maintenance treatments every quarter preserved the outcome.
Practitioner Feedback
"The burst mode is a genuine differentiator. My previous RF microneedling device fired at one depth only. With the Crystallite Depth 8, I get stacked heating in a single pass, and the collagen response is visibly stronger. Patients tolerate it without topical anesthetic for most facial work."
- Dr. Elena M., Dermatologist, Berlin
"We bought the system mainly for postpartum stretch marks. The 40-pin head covers large abdominal areas quickly, and the disposable probes reassure our clients about hygiene. Results have been consistent, and the machine has become a core part of our body rejuvenation menu."
- Sofia R., Clinic Director, London
"The dual handpiece setup saves so much time. I can treat a patient's face and then move to their neck without changing any hardware. The addition of serum infusion right after needling has become a popular premium add-on, and clients see faster recovery."
- Dr. Lucas P., Medical Spa Owner, Paris



Manufacturing and Certifications
Weifang Benomi Electronic Technology Co., Ltd. has built professional aesthetic devices for over 18 years, operating from ISO-classified cleanrooms in Weifang, China. Every Crystallite Depth 8 system is assembled and tested under strict quality controls. The disposable probes are produced on dedicated lines with consistent needle sharpness and insulation integrity.
The device holds ISO 13485, CE, and FDA certifications. Benomi offers OEM and ODM support, including custom branding on the console, handpieces, and probe packaging. Spare parts are readily available, and the modular architecture simplifies maintenance for international users.
Wholesale Policies and Customization Support
Minimum Order Quantity: One evaluation unit is available. Wholesale pricing begins at five units.
OEM/ODM Customization: Custom logos and colors on the machine body, interface, and packaging. Free logo design assistance is provided during quotation.
Packaging: Export-grade protective carton or flight case. Branded packaging options are available for larger orders.
Lead Times: Sample units ship within 3 business days. Customized batch orders ship within 7 to 18 business days.
Warranty: 2 years on the main console and handpieces. Disposable probes are consumable items and excluded from warranty.
After-Sales Support: 24-hour online response via email, video call, or remote diagnostics. Warranty-covered parts are dispatched free of charge.
Training: Remote onboarding and a full video library are included with the first purchase. On-site training is available for volume orders.


Frequently Asked Questions
What makes the Crystallite Depth 8 different from ordinary microneedling?
Standard microneedling depends only on mechanical wounds to stimulate collagen. The Crystallite Depth 8 adds radiofrequency energy emitted from the needle tips, so each puncture also delivers controlled heat at a chosen depth. This dual mechanism produces stronger remodeling and allows treatment of deeper tissue layers.
Is the treatment painful?
Most patients feel a light pricking or heat sensation. Because the needle shafts are insulated, RF only exits at the tip, limiting surface injury and pain. Topical anesthetic is optional for deeper protocols but often unnecessary for facial treatments.
How many sessions are typically needed?
For acne scars and stretch marks, four to six sessions spaced three to four weeks apart produce the best results. For general rejuvenation and fine lines, three to four sessions are usually sufficient. Active acne can improve in two to three sessions. Maintenance visits every three to six months help retain the outcome.
Are the probes really single-use?
Yes. Every 12-pin, 24-pin, and 40-pin probe is disposed of after one patient. This guarantees sterility and prevents needle dulling. Replacement probes are sold separately as consumables.
Can the device be used on darker skin?
The insulated needle design minimizes epidermal damage, lowering the risk of post-inflammatory hyperpigmentation. However, darker skin types should be treated with conservative energy settings, and a patch test is recommended before the first full session.
What is the typical downtime?
Mild redness and slight swelling may last one to two days. Tiny micro-crusts may form and peel over several days. Makeup can generally be applied the next day. Sun protection should be maintained for at least two weeks after treatment.
How does the burst mode work?
The needles penetrate to the deepest selected depth, fire RF, retract to a middle depth, fire again, and then retract further. This multi-level emission pattern creates stacked thermal columns within a single insertion, maximizing collagen stimulation.
How do I request a quote or become a distributor?
Complete the inquiry form on this page with your clinic name, country, and whether you need a sample unit, standard wholesale pricing, or OEM branding. A product specialist will respond within one business day with a tailored proposal, lead time, and any additional documentation you require. Your contact information is kept confidential.
Hot Tags: crystallite depth 8 rf micro needling machine, China crystallite depth 8 rf micro needling machine manufacturers, factory
Previous
Al Skin And Hair AnalyzerNext
1927nm Thulium LaserSend Inquiry














