Tecar Therapy Machine
video

Tecar Therapy Machine

Dual-Mode Deep Hyperthermia: Utilizes Capacitive Electric Transfer (CET, targeting superficial muscles and skin) and Resistive Electric Transfer (RET, targeting deep bone, tendon, and joint tissues) to achieve precise, layered heating, rapidly reducing inflammation and pain while promoting tissue repair.
Focused on Rehabilitation and Pain Management: Addresses conditions such as sports injuries, post-operative recovery, arthritis, tendonitis, and neuropathies; significantly shortens recovery times and is highly favored by athletes and physical therapists.
Compatible with Manual Therapy: Allows for the simultaneous integration of manual techniques—such as massage, joint mobilization, and muscle activation—during radiofrequency therapy, creating a synergistic effect that accelerates the rehabilitation process.
Send Inquiry

Description

Technical Parameters

Product Overview
The Tecar Therapy Machine from Benomi is a radiofrequency diathermy system designed for deep tissue heating, pain relief, rehabilitation, and aesthetic body work. The technology is based on capacitive and resistive energy transfer, often referred to as CRET. Radiofrequency current passes from an active electrode held by the therapist into a return plate, and the body's own electrical resistance converts that current into warmth. Unlike infrared lamps or heating pads, the temperature increase occurs inside the tissue rather than on the skin surface.

The console offers two distinct application modes. Capacitive mode is suited for superficial structures with high water content, including the skin, muscles, and blood vessels. Resistive mode targets denser, high-resistance tissue such as tendons, ligaments, bones, and joint capsules. By switching between these modes, a practitioner can treat a superficial muscle strain and a deep joint condition during the same session. The system is used in physiotherapy, chiropractic care, sports medicine, and medical aesthetics. It is non-invasive, requires no anesthesia, and produces no downtime.

A key advantage of the Benomi Tecar platform is that it works alongside manual therapy. The therapist can keep the electrode moving while performing massage, stretching, passive motion, or muscle activation. The RF output follows the hands, turning routine manual care into a targeted thermotherapy session. This combination generally produces faster pain relief and better functional recovery than either method alone.

10

Key Advantages

Tissue-Specific Treatment Through Two Modes
Capacitive mode delivers energy to electrolyte-rich tissue close to the surface. Resistive mode drives heat into fibrous, dense structures. This gives the clinician the ability to treat skin, muscle, tendon, ligament, and joint conditions without changing devices.

Accelerated Healing Rather Than Temporary Numbing
The heat dilates capillaries, improves oxygenation, and speeds the removal of metabolic waste. The result is not just a short-term reduction in pain. The body's repair mechanisms are activated, which is why Tecar is commonly used in post-surgical and sports injury protocols.

Effective Across Musculoskeletal and Aesthetic Indications
The machine supports rehabilitation for bruises, sprains, tendinitis, low back pain, cervical pain, shoulder pain, knee pain, and ankle distortions. It also improves microcirculation, lymphatic drainage, and skin oxygenation, making it useful for cellulite, edema, scar tissue, and mild skin laxity.

Combines With Manual Techniques
Many electrotherapy machines require a fixed, static protocol. The Benomi Tecar system is different. The therapist can apply massage, mobilization, stretching, or muscle activation while the electrode delivers RF. The treatment becomes a seamless blend of technology and hands-on skill, often leading to faster outcomes.

Short Sessions With No Consumables
A focused treatment usually takes 15 to 25 minutes. The electrodes are reusable, and there are no disposable tips, gels, or cartridges. This keeps operating costs low and makes the machine suitable for busy clinics that see multiple patients per hour.

Comfortable and Non-Invasive
Patients generally feel a pleasant, deep warmth. The intensity is adjustable in real time, and the therapist controls the electrode position throughout. There is no recovery period, and patients can return to daily activity immediately.

Supports Multiple Practitioner Roles
Chiropractors, physiotherapists, osteopaths, podiatrists, sports therapists, and aesthetic practitioners can all integrate the device into their existing service menus. The broad clinical range makes it a practical investment for multidisciplinary clinics.

 

Technical Specifications

The final specifications may vary depending on the selected model and handpiece configuration. A complete data sheet is available upon request.

Parameter Detail
Technology Capacitive and Resistive Energy Transfer (CRET)
RF Frequency Therapeutic band (commonly 448 kHz, model-dependent)
Operating Modes Capacitive, Resistive, Combined
Power Output Adjustable via touchscreen
Electrode Types Capacitive plate, resistive plate, handpiece electrodes
Display Touchscreen interface
Session Duration Typically 15 to 25 minutes per area
Power Supply 100–240 V AC, 50/60 Hz
Certifications ISO 13485, CE, FDA
Warranty 2 years

Contact the Benomi export team for exact model specifications before ordering.

1

Ideal Settings

Physiotherapy and rehabilitation clinics treating post-operative stiffness, muscle strains, ligament injuries, and chronic joint pain.

Sports medicine centers focused on faster recovery and return-to-play after training or competition.

Chiropractic and osteopathy practices combining spinal adjustments with deep tissue heating for better patient outcomes.

Pain management clinics offering drug-free relief for low back pain, neck pain, tendinopathy, and peripheral nerve discomfort.

Medical spas and aesthetic clinics using Tecar for lymphatic drainage, cellulite reduction, skin tightening, and post-liposuction recovery.

Podiatry practices addressing plantar fasciitis, ankle sprains, and lower limb circulation problems.

Pelvic floor rehabilitation units incorporating the device into non-invasive treatment programs.

 

Treatment Comparison

Case A: Cervical Pain and Trigger Points
A 41-year-old female office worker presented with chronic cervical pain and active trigger points in the upper trapezius. She received six sessions over three weeks. The therapist used capacitive mode over the superficial muscle layer, then switched to resistive mode over the cervical facet joints. Pain scores dropped from 7/10 to 2/10 by the final visit, and neck rotation improved markedly. The patient remained pain-free at one-month follow-up with home exercises only.

Case B: Ankle Sprain Recovery
A 22-year-old male athlete sustained a grade two lateral ankle sprain. After the acute phase, he began Tecar therapy three times per week. Resistive mode was applied over the anterior talofibular ligament, and capacitive mode was used around the surrounding soft tissue for edema control. Swelling reduced visibly by the second session. The athlete returned to full training after 12 days, approximately five days earlier than his previous sprain recovery.

Case C: Post-Surgical Knee Rehabilitation
A 55-year-old male underwent arthroscopic knee surgery and developed persistent swelling and stiffness. He completed eight Tecar sessions combined with passive range of motion exercises. The therapist applied resistive mode over the joint capsule and capacitive mode over the quadriceps. Knee flexion increased from 90 degrees to 125 degrees over the course of treatment, and the patient reported significantly less pain during ambulation.

Case D: Cellulite and Fluid Retention
A 37-year-old female with Grade 2 cellulite on the posterior thighs received ten sessions combining capacitive mode with manual lymphatic drainage. After the course, thigh circumference reduced by 2 cm, and the skin texture appeared noticeably smoother. The patient described the sessions as comfortable and relaxing, with no post-treatment soreness.

 

Practitioner Feedback

"The Tecar machine has become the cornerstone of our rehabilitation protocols. What sets it apart is that I can keep my hands on the patient while the RF is working. That combination of manual therapy and deep heat produces results that I have not seen with standalone electrotherapy."
- Dr. Marco V., Physiotherapist, Rome

"We treat professional soccer players, and recovery speed is non-negotiable. Tecar sessions have shortened our return-to-play timelines for muscle injuries and ankle sprains. The athletes like the feeling of warmth, and the fact that there is no downtime means we can use it right after a match."
- Elena S., Sports Therapist, Madrid

"Our clinic added Tecar for post-liposuction patients. The lymphatic drainage effect is excellent. Fluid retention drops quickly, fibrosis feels softer, and the skin looks healthier after just a few sessions. It is now included in every body contouring package we offer."
- Dr. Sofia L., Aesthetic Physician, Paris

3

2

Manufacturing and Certifications
Weifang Benomi Electronic Technology Co., Ltd. has specialized in the design, production, and service of professional aesthetic and therapeutic equipment for more than 18 years. The company operates from ISO-classified cleanrooms in Weifang, China, where each Tecar Therapy Machine is assembled and tested under strict quality controls. The production process includes full-function testing before packing, and a test video is sent to the buyer for verification.

The device carries ISO 13485, CE, and FDA certifications. Benomi supports international clients with OEM and ODM customization, including logo placement on the console, handpieces, and packaging. The company provides ongoing after-sales support and maintains a modular design that simplifies component replacement when needed.

 

Wholesale Policies and Customization Support

Minimum Order Quantity: A single evaluation unit is available for clinics and distributors. Wholesale pricing starts at five units.

OEM/ODM Customization: Custom branding on the machine body, touchscreen interface, and handpieces. Logo design assistance is provided at no cost during the quotation phase.

Packaging: Export-grade protective carton or flight case. Custom-branded packaging is available for volume orders.

Lead Times: In-stock sample units ship within 3 business days. Branded batch orders typically ship within 7 to 18 business days, depending on customization depth.

Warranty: 2-year comprehensive warranty on the main unit and handpieces.

After-Sales Service: A 24-hour online support team handles troubleshooting via email, video call, or remote diagnostics. Warranty-covered spare parts are dispatched immediately at no cost.

Training: A remote onboarding session and a video training library are provided with the first order. On-site training can be arranged for larger purchases.

2661-

2661--2

Frequently Asked Questions

What is Tecar Therapy?
Tecar Therapy is a radiofrequency-based deep heating treatment. The machine passes RF energy through the body between an active electrode and a return plate. The tissues produce heat internally, which increases circulation, speeds metabolism, and supports the body's natural repair process.

What is the difference between capacitive and resistive modes?
Capacitive mode is used for superficial, water-rich tissues like muscles, skin, and blood vessels. Resistive mode targets deep, dense structures such as tendons, ligaments, bones, and joint capsules. Most treatment sessions combine both modes depending on the condition being treated.

Does the treatment hurt?
No. Most patients feel a pleasant, deep warmth. The intensity is adjustable, and the therapist controls the electrode position throughout the session. Many people find the experience relaxing.

How many sessions are needed?
Acute conditions often respond in three to six sessions. Chronic pain or post-surgical rehabilitation may require six to ten sessions. Aesthetic protocols like cellulite reduction and skin tightening are usually delivered in a course of six to twelve sessions. Your practitioner will recommend a plan based on your specific condition.

Can it be combined with other therapies?
Yes. Tecar works well alongside manual therapy, exercise rehabilitation, cryotherapy, and many aesthetic treatments. The therapist can apply massage, stretching, or joint mobilization while the RF is active, which often improves the overall outcome.

Are there any contraindications?
The device should not be used over areas with active infections, open wounds, or malignant tumors. It is contraindicated during pregnancy, in patients with pacemakers or other implanted electronic devices, and in those with severe circulatory disorders or acute thrombosis. A full medical history should be reviewed before treatment.

How long does a session last?
A focused treatment on one area usually takes 15 to 20 minutes. Larger areas or combined protocols may require up to 30 minutes. The portable design allows the machine to be moved between treatment rooms easily.

How do I request a quotation or become a distributor?
Complete the inquiry form on this page with your clinic or company name, country, and whether you need a sample evaluation unit, standard wholesale pricing, or OEM branding. A product specialist will reply within one business day with a tailored proposal, current lead time, and any additional documentation you require. Your contact information is kept strictly confidential.

Hot Tags: tecar therapy machine, China tecar therapy machine manufacturers, factory

Send Inquiry