CRYOTHERAPY THERMAL SHOCK FAT CAVITATION SPEED DIET Machine

Product Overview
Benomi presents the CoContour 5.0, a body sculpting and skin rejuvenation workstation that pairs two independent fat-reduction mechanisms in a single cabinet. The first is thermal shock: a software-driven sequence that moves the skin from warmth to cold and back again, creating a temperature swing that fat cells tolerate poorly. The second is 4D cavitation, which uses four ultrasonic transducers to generate low-frequency pressure waves. These waves rupture adipocyte membranes mechanically, turning stored fat into a liquid that the lymphatic and vascular systems can carry away. When the two technologies run back-to-back or simultaneously, they address both the structural integrity of fat tissue and the metabolic rate of the surrounding area.

The hardware includes seven treatment heads. Four broad cooling plates are intended for the abdomen, flanks, thighs, and back. Three compact plates fit the face, neck, arms, and other small contours. A dedicated cavitation handpiece targets precise bulges, and EMS capability is integrated throughout the system at 4000 Hz. All five connection ports sit on the main unit, so a single operator can position pads on one client while using the cavitation head on another area - or on a second client - without changing machines.

The console runs on a 15-inch capacitive touchscreen. Temperature, ultrasonic output, EMS frequency, and treatment time are all visible in real time. Presets exist for slimming, cellulite, toning, facial rejuvenation, and post-weight-loss skin tightening. Operators may adjust any value manually. The interface accepts custom logos and language settings, and the body color can be altered for OEM orders. A storage shelf built into the chassis holds cryogels and protective membranes, keeping the workspace tidy.

Key Advantages

Dual Fat Destruction Pathways
Cold alone kills a percentage of fat cells through apoptosis. Cavitation alone disrupts membranes through ultrasonic pressure. When both are used together, the thermal stress weakens the cell wall and the ultrasonic wave finishes the job. This dual approach shortens the total number of sessions needed to reach a visible contour change.

Thermal Shock Feels Softer Than Static Freezing
Continuous cryolipolysis keeps tissue near freezing for long periods, which can cause numbness, aching, and post-treatment soreness. The CoContour 5.0 alternates a 45-degree Celsius warming phase with a cooling phase that drops the wand to -18 degrees Celsius and the plates to -10 degrees Celsius. The warmth between cold intervals keeps the client comfortable and improves blood flow, which means the destroyed fat clears faster.

Multi-Handle Workflow Expands Daily Capacity
One staff member can place four large plates on a client's abdomen and thighs, then use a small plate or cavitation head on the face or arms. The machine handles all of this concurrently. For a clinic charging by the area, this means more billable zones per hour without adding payroll.

EMS Adds Muscle Tone to Volume Reduction
Every applicator delivers electrical muscle stimulation at 4000 Hz. The contractions push lymph through the treated region and engage the underlying muscle fibers. Clients end a course with a firmer, more athletic contour rather than a merely smaller one.

Facial Protocols Are Built In, Not Added On
The compact plates were designed for delicate skin. Alternating hot and cold on the cheeks, jawline, and neck triggers collagen production, lifts sagging tissue, and reduces submental fullness. The same thermal cycling can calm redness and smooth the skin's surface. A 20-minute facial session produces immediate visible tightening with no recovery period.

No Consumables, No Suction, No Downtime
The system works through direct contact, not vacuum. There are no disposable cups, gels, or filters to replace. Patients leave with no bruising, no swelling, and no activity restrictions.

Custom Branding for Distributors
Benomi can apply a clinic's logo to the touchscreen and adjust the chassis color to match a brand. The interface language can be localized, allowing a distributor to present the device under their own name in any market.

Large Coverage With Deep Reach
Each cooling plate has an 80 mm active surface. Four plates together treat roughly 20 by 40 centimeters. Cold penetrates to about 4 centimeters below the skin, reaching the deep fat that sits under the superficial layer. The cavitation head focuses on smaller, stubborn deposits with precision.

Technical Specifications

Ideal Settings

Body contouring clinics that want a multi-area treatment with minimal staff involvement.

Aesthetic practices offering both facial and body services from a single platform.

Postnatal recovery centers addressing loose skin, stretch marks, and stubborn deposits after childbirth.

Weight management centers pairing the device with dietary guidance for patients who have plateaued.

Mobile therapists who can transport the system and operate it without an assistant.

Spas wanting a high-ticket service that requires no consumable inventory.

Treatment Comparison

Case A: Stubborn Lower Abdomen
A 43-year-old woman with a persistent lower-abdomen bulge, unchanged by eighteen months of exercise, completed five sessions over six weeks. Each visit used the four large plates in thermal shock mode for 35 minutes, followed by ten minutes of cavitation on the midline. Her waist measurement dropped 1.5 centimeters after the first visit. By the end, the total loss reached 5 centimeters, and the skin felt thicker and more resilient. She reported that her clothes fit differently and that the area no longer felt "spongy."

Case B: Cellulite on the Posterior Thighs and Buttocks
A 39-year-old female with Grade II cellulite received six treatments combining large plates and the EMS function. The plates were strapped to the back of each thigh for thirty minutes while EMS contractions worked the glutes. After three sessions, the orange-peel texture was visibly reduced. After the full course, each thigh measured 3 centimeters smaller. The patient described the feeling as "firm but smooth" and continued with monthly maintenance.

Case C: Jawline Definition
A 58-year-old male with early jowls and soft submental tissue underwent five facial sessions using the small plates. Each 20-minute session alternated heat and cold along the jaw and under the chin. Submental circumference decreased by 1.5 centimeters, and the jaw angle became sharper. He booked maintenance treatments every six weeks to hold the result.

Case D: Skin Laxity After Major Weight Loss
A 51-year-old woman who had lost 40 kilograms presented with loose skin on the upper arms and lower abdomen. Eight sessions combined thermal shock, cavitation, and EMS. The arm skin became noticeably firmer after four visits. By the end, she reported that the skin on her abdomen felt less crepe-like and that the contour had smoothed considerably.

Practitioner Feedback
"This machine replaced two older devices in our clinic. The combination of thermal shock and 4D cavitation works faster than either one alone, and the multi-handle design means I can treat the body and face at the same time. Our booking rate for body contouring has increased by about a third since we introduced it."
- Dr. Elena M., Aesthetic Clinic Owner, Madrid

"We were hesitant about another cryo device, but the absence of suction made a real difference. Patients do not bruise, they do not complain about pinching, and the results are at least as good as the vacuum machines we used before. The EMS is a genuine bonus - the muscle tone change is noticeable."
- Marco V., Body Contouring Specialist, Barcelona

"The facial plates are the hidden value. We now run a non-surgical face and neck lift program using this device, and it has become our most popular add-on. The custom logo on the touchscreen also gives the machine a branded, premium feel."
- Sophie L., Spa Director, Paris

Manufacturing and Certifications
Weifang Benomi Electronic Technology Co., Ltd. has been designing and producing professional aesthetic systems for over 18 years. The manufacturing process takes place inside ISO-classified cleanrooms in Weifang, China, where air quality is controlled to protect sensitive electronic and thermal components. Every CoContour 5.0 is tested for thermal accuracy, cavitation output, EMS frequency, and electrical safety before shipment. A recorded test is sent to the buyer for verification.

The device carries ISO 13485, CE, and FDA certificates. Benomi provides full OEM and ODM support, including custom logos, body color changes, language localization, and branded packaging. After-sales support is available around the clock by email, video call, or remote access.

Wholesale Policies and Customization Support

Minimum Order Quantity: One evaluation unit may be ordered for testing. Volume pricing applies from five units.

OEM/ODM Options: Custom logo on the touchscreen, chassis color changes, language configuration, and branded packaging. Graphic design assistance is included at no cost during quotation.

Packaging: Export-grade carton with dense foam. Custom-branded boxes available for bulk orders.

Lead Times: Stock sample units ship within 3 business days. Customized orders take 7 to 18 business days depending on the changes requested.

Warranty: Two years on the main unit, all applicators, and the touchscreen.

After-Sales Service: 24-hour response window. Warranty spare parts are dispatched immediately without charge.

Training: Remote onboarding plus a video library included with the first order. On-site training can be arranged for larger purchases.

Frequently Asked Questions

Why combine cold therapy with cavitation instead of using one or the other?
Cold therapy damages fat cells through thermal stress, while cavitation destroys them through ultrasonic pressure. When used together, the heat-cold cycle weakens the cell wall, and the ultrasonic wave finishes the rupture. The body then clears the released fat through the lymphatic system. The dual approach reduces the number of sessions needed and produces more complete contouring.

How comfortable is the treatment?
Most patients describe alternating cool and warm sensations with a light muscle flutter from the EMS. There is no suction, no pinching, and no need for anesthetic. Many people find the session relaxing enough to doze off.

How soon will I see a change?
Immediate changes are often visible after the first session, particularly in skin tightness and circumference. A full course of five sessions on one area is recommended, spaced a week apart. The final result appears about two weeks after the last session, once the body has fully metabolized the disrupted fat.

Is the machine safe for facial use?
Yes. The compact plates were specifically designed for the face and neck. The thermal cycling is gentler on delicate skin and promotes collagen production rather than causing frostbite. The protocols for facial lifting and double chin reduction are preloaded in the system.

Can I run multiple applicators at the same time?
Yes. The console has five connection ports, and the software allows different applicators to operate independently. A single practitioner can place four large plates on the body and then use a small plate or cavitation head on another area simultaneously.

What are the contraindications?
Pregnancy, active infections in the treatment zone, severe cold sensitivity, certain cardiovascular conditions, and metal implants near the treatment area. A medical history review is required before the first session.

How do I request a sample or a wholesale quote?
Use the inquiry form on this page. Include your business name, country, and the type of order you are considering - sample evaluation, standard wholesale, or OEM branding. A product specialist will reply within one business day with pricing, lead time, and any documentation you need. Your contact details remain confidential.

Hot Tags: cryotherapy thermal shock fat cavitation speed diet machine, China cryotherapy thermal shock fat cavitation speed diet machine manufacturers, factory