2-in-1 HIFU & Sliding Ultrasound System
Patented gentle safety technology: Features large-focal-zone gliding motion that gradually raises temperatures to 55–60°C (avoiding the tissue damage associated with single-point coagulation at 60–70°C) combined with UPT (Ultra-Pulse Technology, <50ms); results in minimal pain, post-treatment redness that subsides within 1–3 hours, and zero downtime.
Comprehensive anti-aging and body contouring solution: D2.0 for fine line reduction and skin rejuvenation; D3.0 for tightening and fat reduction; D4.5 for deep-level jawline lifting; body probes for simultaneous fat reduction and cellulite tightening; full-face treatment (1,000 shots) takes 40–60 minutes, with results peaking at 3–6 months and lasting approximately one year.
Description
Technical Parameters
7D Face Lifting and Body Contouring Platform
The Benomi 2-in-1 HIFU & Sliding Ultrasound System combines facial lifting, skin tightening and body contouring in one professional platform. Its seven treatment depths cover the dermis, superficial fascia, SMAS layer and multiple subcutaneous fat layers, allowing clinics to build protocols for facial rejuvenation and body shaping with one machine.
The system uses a sliding ultrasound handpiece for continuous treatment and a focused-point handpiece for selected areas requiring more precise energy delivery. A dedicated body handpiece adds 6 mm, 9 mm and 13 mm treatment depths for the abdomen, thighs, arms and buttocks.
Product Introduction
7D Multi-Depth Ultrasound Technology
The system uses micro- and macro-focused ultrasound to deliver controlled thermal energy beneath the skin. Different cartridges target different depths, allowing operators to work from the superficial dermis to the SMAS layer and deeper body-fat zones.
The intended treatment logic is straightforward:
Shallow layers: support collagen stimulation, fine-line care and skin texture improvement.
Middle layers: support contour refinement, soft-tissue tightening and the appearance of mild fullness.
Deep facial layer: target the SMAS region for lifting-focused protocols along the jawline, lower face and neck.
Body layers: address selected subcutaneous fat and loose-looking skin on the abdomen, thighs, arms and buttocks.
Sliding and Focused Treatment Modes
The D sliding handpiece delivers continuous motion at 6, 8 or 10 Hz for even coverage. The M focused handpiece delivers point-based treatment for selected areas such as the jawline, neck and marionette-line region.
The platform also features a short-pulse UPT mode with pulse width below 50 ms and a stated 55–60°C thermal target for sliding treatment. The operating interface displays pitch, treatment length, power, shot count and current output data.

Product Advantages
Two core applications in one system: facial lifting and body contouring from one professional platform.
Seven treatment depths: D2.0, D3.0, D4.5, M3.0, M4.5, MF6 and MF9/13 mm cartridges cover different target layers.
Sliding ultrasound operation: continuous movement supports faster, more even treatment coverage than a point-only workflow.
Focused-point handpiece: adds targeted treatment for the jawline, neck and areas with more visible laxity.
Large-focus heating design: the stated 2.5–3 mm focus distributes energy across a broader area for a more gradual warming response.
Short-pulse UPT output: pulse width below 50 ms is designed to control the heat-diffusion range.
Face and body versatility: one machine can support facial rejuvenation, jawline care, waist shaping, thigh contouring and arm or buttock protocols.
Live treatment data: display shot count, remaining shots, pitch, treatment length and output settings during operation.
Private-label ready: OEM/ODM support includes logo, interface, housing color, packaging and user manuals.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product type | 2-in-1 HIFU and sliding ultrasound system |
| Core applications | Facial lifting and body contouring |
| Facial sliding cartridges | D2.0: 1.5 mm; D3.0: 3.0 mm; D4.5: 4.5 mm |
| Facial focused cartridges | M3.0: 3.0 mm; M4.5: 4.5 mm |
| Body cartridges | MF6: 6 mm; MF9: 9 mm; MF13: 13 mm |
| D-handpiece output | 6 Hz, 8 Hz and 10 Hz |
| D-handpiece shot capacity | Up to 200,000 shots per cartridge, according to supplier specification |
| Adjustable pitch | 0.5–2.0 mm |
| Adjustable treatment length | 5–25 mm |
| UPT pulse width | Below 50 ms |
| Stated sliding thermal range | 55–60°C |
| Focal area | Approximately 2.5–3 mm, according to supplier specification |
| Operation interface | Touchscreen with visual parameter control |
| Live information | Shot count, remaining shots and output data |
| Handpiece configuration | Sliding D handpiece, focused M handpiece and body MF handpiece |



Professional Applications
The 2-in-1 HIFU & Sliding Ultrasound System is designed for trained professionals in:
Medical spas and aesthetic clinics
Beauty salons and skin-management centers
Plastic surgery and cosmetic treatment centers
Facial rejuvenation studios
Body-contouring and slimming clinics
Postpartum wellness centers, subject to medical assessment
Beauty-equipment distributors and private-label brands
Facial Applications
Fine-line and wrinkle appearance
Skin firmness and texture
Jawline definition
Mild facial fullness and lower-face contour
Double-chin appearance
Neck and marionette-line care
Body Applications
Abdomen and waist contouring
Thigh and buttock shaping
Upper-arm skin firmness
The appearance of cellulite and loose-looking skin
Post-weight-change body-care programs
Treatment Comparison and Before-and-After Presentation
| Treatment Focus | Before Treatment | After a Completed Protocol |
|---|---|---|
| Facial lifting | Photograph the jawline, cheeks and lower face from fixed angles | Compare visible contour and skin firmness under matched conditions |
| Fine-line appearance | Record forehead, eye-area and mouth-area lines | Compare texture and line visibility with consistent lighting |
| Double-chin appearance | Record facial profile and neck position | Review changes in contour and visible fullness |
| Body contouring | Record circumference and standardized body photographs | Compare waist, abdomen, thigh or arm contour |
| Loose-looking skin | Document skin laxity in the treatment area | Review visible firmness over the recommended follow-up period |
| Cellulite appearance | Photograph texture with the same posture and lighting | Compare surface appearance after the selected protocol |
Customer Feedback and Cooperation Examples
United States - Medical Spa Owner
"We were looking for one platform that could cover facial lifting and body contouring. The separate facial and body cartridges make it easier to create treatment packages without adding another machine to the room."
France - Aesthetic Clinic Manager
"The sliding handpiece gives our operators a more continuous treatment workflow, while the focused handpiece helps them work on the jawline and neck. The live shot-count display is useful for treatment records."
Australia - Beauty Equipment Distributor
"Our buyers wanted a machine that could be positioned as both a facial rejuvenation system and a body-contouring platform. Benomi supported the configuration review, logo placement and product documentation for the distributor launch."



Benomi Factory Strength and Certification Support
Weifang Benomi Electronic Technology Co., Ltd. has more than 18 years of experience in the research, production, sales and service of professional beauty equipment.
Internationally standardized dust-free production facility
OEM and ODM development for distributors and private-label brands
Free logo design and placement guidance for qualifying projects
Custom interface language, machine color, packaging and user manuals
One-year standard warranty
24-hour after-sales response
Online training, video troubleshooting and replacement-parts support
Benomi states that ISO, CE and FDA-related documentation is available for applicable products or business processes.
Wholesale and OEM/ODM Policies
| Item | Information |
|---|---|
| Minimum order quantity | 1 unit for a sample; 3 units for wholesale pricing |
| Standard configuration | Main unit, facial D/M handpieces, body MF handpiece and seven treatment cartridges |
| OEM/ODM options | Logo, startup screen, interface language, housing color, packaging and user manual |
| Free logo service | Basic artwork and placement guidance for qualifying orders |
| Sample lead time | 7–10 days after configuration confirmation |
| Bulk lead time | 20–30 days, depending on quantity and customization |
| Shipping | Express, air freight, sea freight or buyer-nominated forwarder |
| Payment | T/T, PayPal, Alibaba Trade Assurance; L/C considered for large orders |
| Warranty | 1 year standard, subject to the sales agreement |
| After-sales support | 24-hour response, online training, video troubleshooting and parts assistance |
Production begins after payment, final configuration and artwork approval. Shipping time is quoted separately.


Frequently Asked Questions
1. What is the 2-in-1 HIFU & Sliding Ultrasound System?
It is a professional ultrasound platform with two main applications: facial lifting and body contouring. The system uses sliding, focused and body-specific cartridges to address different tissue depths.
2. How many treatment cartridges are included?
The 7D configuration includes three facial sliding cartridges, two facial focused cartridges and three body cartridges. Confirm the final handpiece and cartridge list before payment because configurations may vary by order.
3. What is the difference between sliding and focused treatment?
The sliding handpiece moves continuously across the treatment area and supports broad, even coverage. The focused handpiece delivers point-based energy for selected areas such as the jawline, neck and lower-face contour.
4. Which areas can be treated?
Facial areas include the forehead, eye area, cheeks, jawline, double chin and neck. Body applications include the abdomen, waist, thighs, arms and buttocks, subject to client screening and local requirements.
5. When can clients expect to see changes?
The supplied protocol describes immediate tightening, continued collagen remodeling around one month and a stronger visible result between three and six months. Individual response varies with skin condition, settings, treatment plan and aftercare.
6. Can Benomi customize the machine for my brand?
Yes. OEM and ODM options include logo placement, interface language, housing color, packaging and user manuals. Wholesale pricing starts from three units, while deeper customization may require additional confirmation.
Request a 2-in-1 HIFU Wholesale Quote
Tell Benomi your destination country, required quantity, preferred cartridge configuration and branding requirements. The export team will provide the current price, technical sheet, production schedule, available compliance documents and shipping options.
Hot Tags: 2-in-1 hifu & sliding ultrasound system, China 2-in-1 hifu & sliding ultrasound system manufacturers, factory
Previous
No InformationSend Inquiry
You Might Also Like














