Diode Laser Hair Removal Machine Maintenance

1. It is best to replace the purified water once a month.
2. The machine must be operated in an air-conditioned room. Room temperature is preferably <28°C.
3. The ambient temperature cannot be lower than zero, otherwise the ice will damage the water tank and water channel inside the machine as well as the handle parts.
4. Clean off the gel on the handle piece and make sure there is no dust around the sapphire.
5. Do not bend the tube of the handle piece excessively, otherwise it may cause low water flow warning.
6. Do not frequently plug and unplug the handle connector. This can cause water leaks or blockages or poor electrical connections.
7. Do not shoot the laser at the target at will, otherwise it may cause burning or fire.
8. When not in use, please always put the handle and bracket on the main unit. Otherwise, condensation may flow back into the laser stack in the handle piece, causing the laser to fail.
9. If you do not use the machine for more than 2 weeks, please drain the water in the machine.
A. Connect the water valve to both the drain and the water outlet.
B. Connect the funnel to the water valve of the water outlet, and the water will flow out. Be sure to use a basin to catch water.
C. After use, the water valve needs to be removed.

Hot Tags: diode laser hair removal machine maintenance, China diode laser hair removal machine maintenance manufacturers, factory, laser hair removal device, 808nm diode laser hair removal machine, laser hair removal machine professional, Hair Remover Laser, Hair Laser Removal, Laser Hair Removal